3000w LuxuryEbikes Kit

DESCRIPTION

This 3000w LuxuryEbikes Kit is designed for use with 72v 30ah - 72v 20ah Batteries. It is compatible with our 72v Batteries.

Please verify the dimensions (130-150mm dropouts) to confirm compatibility with your requirements for the 3000w wheel (fits most hard-tail mountain bikes). Feel free to DM us on instagram should you need any additional information.

PACKAGE INCLUDES

- 1 x 3000W brushless direct drive (gearless) rear hub motor laced to strong MTX rim & XT150 connectors

- 1 x 60a (or 80a) brushless motor controller (please ensure your battery can match this 60-amperage or 80-amperage continuous power output otherwise it can damage your battery. Feel free to ask if unsure DM on Instagram). 

- 1 x LCD SW900 display (or UKC1 display)

- 1 x pedal assist crank sensor (PAS)

- 1 x throttle full twist (right hand) and matching left hand handlebar grip

- 1 x pair of brake levers (suited for mechanical/cable brakes)

DESCRIPTION

This kit offers much more power than the 1000W or 1500W kits we sell and can reach up to speeds of over 90km/hr or 100km/hr with 80amps. Please check your local laws and guidelines when using this kit on your bike and apply the 25km/hr 250W limiter when using this kit in public areas. Generic Instructions are included in this kit only (i.e. due to the many DIY variables possible no specific instructions are included). If you require assitance at any stage please do not hesitate to contact us.

KEY FEATURES

- Wheel Type: Rear Wheel

- Drop out: 135mm - 150mm  (suits most bikes. Not suitable for thru axles)

- Wheel size: 26", 27.5” or 29”

- Rim: Alloy double wall extra strong 33mm internal rim width

- Gears: Freewheel / screw-on (not suitable for Cassette)

- Motor: Brushless DC direct drive

- Torque: 85 Nm

- Power: 3000W

- Max. speed: 90-100+ km/hr

- Spokes: Steel 12Gx2.6mm

- Mass: 6 kg

- Wheel Axle: 210mm x 10mm

- Max. load capacity: 150 kg (inclusive of the completed bike and rider)

NOTES

- TORQUE ARMS ARE NOT INCLUDED ( FOR 3000W KIT WE RECOMMEND 2 HEAVY DUTY TORQUE ARMS)

- Press the 'M' button on the LCD meter to turn on and start enjoying the full potential of the kit.

- The rim is best suited for 2.35” to 2.5” wide tyres

- AU regulations require that the kit does not exceed 250W continuous power and 25km/hr on public roads and paths therefore please set the ‘P08’ programming setting on the display to 25km/hr under these circumstances. To access the settings, press the ‘UP’ and ‘DOWN’ arrows at the same time for 1 second once the kit is turned on and then short press ‘M’ to toggle through the ‘P’ settings e.g. ‘P01’, ‘P02’ etc. till ‘P08’ and check this value is set to 25km/hr.